- 3-A Brand coating. High quality Sublimation coating with acrylic-polyester nature ( in concentrate form ) for sublimation to wood and plywood.
- With the new wood printing technique you don't need a UV printer to print on wood and you can print large surfaces without being limited by the printing surface in printer.
The package include 0.4 kg concentrate ( 400 gr concentrate).
Other adhesives with 2 or more components, the mixture of they must be used within 4-5 hours.
Unlike these, this concentrate does not mix with other components and is ready for use, can be used whenever needed even in small uses. This makes it economical. This is very easy to use it, with paint brush or paint roller .
Video Tutorial: https://www.youtube.com/watch?v=ikrQ5s0Q43Q
You can make sublimation on wood signs, letters, ornaments,wood and MDF panels, clock, wood frame, coasters, cutting board, box, wood sheets, blanks, etc.
PRODUCT DESCRIPTION
Sublimation coating with acrylic-polyester nature in paste form (concentrate). The concentrate is ready for use.
For the decoration of different wood materials, such as wood board and plywood, through sublimation…
TRANSFER CONDITIONS
Sublimation on wood time and temperature
MATERIAL |
TEMPERATURE |
TIME |
Wood (Plywood) |
180°C (or higher) |
150-200 sec |
The paper may be printed with every kind of sublimation ink.
Such paper has to be transferred at a minimum temperature of 180°C or higher (depending of the ink), for a time of 150 - 200 seconds, quality of the wood permitting.
Good color performance after sublimation
APPLICATION
- You can use paint brush or paint roller for the application of concentrate.
DRYING
- Heat cures with hair dryer, tunel dryer, etc.
SUBLIMATION
- You can make sublimation with normal sublimation paper (after drying ) at a minimum temperature of 180°C or higher (depending of the ink), for a time of 150 - 200 seconds (wood permitting )
Video Tutorial: https://www.youtube.com/watch?v=ikrQ5s0Q43Q
SHELF LIFE: 1 year, storage temperature 10 – 35 °C, away from sunlight
SPECIAL INSTRUCTIONS
- Always test the application characteristics, before starting production.
- It is recommended to do preliminary tests, in order to determine the right transfer time and temperature.
Always test samples prior to production runs.
NON – FLAMABLE, IRRITATING TO EYES & RESPIRATORY SYSTEM, DO NOT SWALLOW